|
 |
| SAWS |
|
|
|
|
| |
"SCE 400"
with tilting blade Ø 400 mm (scoring saw on request).
Thanks to its strong structure, this machine is ideal for general
carpentry work. Also available with carriage sliding on round guide
(version SCE 400 C) and scoring saw on request, it can also be used
for panels. Solidity, practicality and compactness at a reasonable
price. |
| |
 |
 |
| SCE 400 |
SCE 400 C |
|
|
| |
|
| |
"NATALIA"
with tilting blade Ø 300 mm and scoring saw.
Available with anodized aluminium carriage 2600 or 3200 mm long,
sliding on prismatic guides with hardened wheels. Among the optional
items: sawblade Ø 320 mm with bridge guard. |
|
| |
"PUMA B"
and "PUMA S" with tilting blade Ø 400 mm and scoring saw with independent
motor.
Puma B has manual adjustments, Puma S has electric adjustments
for blade height and angle and manual adjustments for scoring saw;
aluminium carriage length from 2600 up to 4300 mm and width 400
mm, sliding on round hardened steel bars. Puma B and S can be equipped
with a wide range of optional items, among which are: swinging control
board, motorised carriage, additional double squaring table, lengthwise
pressure device, trigonometric goniometer, parallel fence and squaring
fence with electronic read-out, laser, automatic star-delta starters. |
|
| |
| OPTIONAL ITEMS |
 |
1) Lengthwise pneumatic hold-down;
2) Overhanging control board; 3) Electronic programmable parallel
fence;
4) Powered carriage; 5) Laser indicating the line of cut; 6) Automatic
SD starters with pushbuttons.
Plus: electronic read-out on the parallel and/or the cross fences,
precision goniometer, additional swivelling fence on the carriage,
uprated motors and more. |
| |
| "PUMA"
with tilting blade Ø 400 mm and scoring saw with electric
adjustments of main blade height, angle, height and alignment of
the scoring blade.
The aluminium carriage, length from 2600 up to 4300 mm and width
400 mm, slides on round hardened steel bars. Puma offers a wide
range of optional items, including: swinging control board, electronic
parallel fence, electronic programmer (to control the parallel fence
and the adjustments for main blade and scoring saw) postforming
cycle, powered carriage, additional double squaring table, lengthwise
pressure device, trigonometric goniometer.
Puma can be equipped, on request, with over-hanging control board,
electronic programmer to control blade height, angle and positioning
of the parallel fence, electronic read-out on the squaring fence,
linear pneumatic hold-down, additional support frame on rail. The
support frame on swivelling arm with telescopic extension is standard.
Also available, on request, powered carriage and accurate trigonometric
goniometer. |
|
|
|
| |
|
| |
 |
"400
E"
4200 x 2200 mm, depth of cut 50 mm, blade Ø 250 mm.
"515 S"
4300 x 2200 mm, depth of cut 80 mm, blade Ø 300 mm.
Available on request: scoring unit, different dimensions;
versions with electronic program. |
|
|
| |
|
| |
|
"SPLENDIDA"
Cutting height 80 mm, electronic pusher with pneumatic pincers,
blade carriage feed with direct drive (without chains) and
variable speed from the control board with inverter. Easy-use
electronic programmer, available on request complete with
video and floppy-disk, equipped with optimizing program. Optional:
rear tables with wheels and front air cushion tables. Accuracy
and versatility at low price for small firms. Tiltable blade
also available. |
|
| |
| "S
2000"
With electronic pusher complete with pneumatic pincers, brushless
motor, toothed rachs, helicoidal pinions, guides with linear
ball-circulation bearings (speed up to 100 m/min); blade carriage
feeding with rack and pinion system and variable speed (up
to 100 m/min) with inverter; electronic adjustments of blade
and scoring saw, with displacements on linear ball-circulation
bearings; automatic centralized lubrication. Control from
PC, with advanced and diagnostic graphics. Optimizing software
programs and remote service, available on request. Versions
(also customized) are available with cutting height 130, 150
and 180 mm and a line of cut with front direct loading or
with rear lifting table (versions "Century T"),
both standard and with rollers and pre-loading roller table. |
|
|
| |
|
"CENTURY"
High performing beamsaw with electronic pusher complete
with pneumatic pincers, brushless motor, toothed racks, helicoidal
pinions, guides with linear ball-circulation bearings (speed
up to 100 m/min); blade carriage feeding with rack and pinion
system and variable speed (up to 100 m/min) with inverter;
electronic adjustments of blade and scoring saw, with displacements
on linear ball-circulation bearings; automatic centralized
lubrication. Control from PC, using advanced diagnostic graphics.
Optimizing software programs and remote service, on request.
Versions (also customized) are available with cutting height
130, 150 and 180 mm and a line of cut with front direct loading
or with rear lifting table (versions "Century T"),
both standard and with rollers and pre-loading roller table.
|
|
|
| |
|
| |
| 
|
Steton have
over thirty-years experience in this field and are able to
offer solutions at any level, even customized, with cutting
heights ranging from 90 to more than 200 mm, in different
equipments, up to plants with double loading systems (lifting
table and suction-cup system, pre-cut system with possible
independent unloader, unloading and automatic re-stacking
plant, trims disposal system, optimizing software program
and stock management.
Technical features can be supplied on request, according
to the details given by the customer. |
|
 |
Lay-out
of a complex angular plant, including:
•
pre-loading roller table
• lifting table and
suction cup loader
• unloading roller table
pallet
• 1st pusher
•
head cross pre-cut unit, with side unloader and cup re-stacker on
the lifting table
• lengthwise beam saw
• 2nd pusher
• crosswise
beam saw
• main unloader / re-stacker
• end shunting system
|
|
| |
|
| |
| 
|
Steton offers
a complete series of band saws, with flywheels diameter 360,
400, 460, 500, 560, 600, 700, 800, 900 mm; optional items
and feeders on request.
|
|
|
| |
|
| |
| 
|
For the processing
of cross-cut, Steton offers:
• Pneumatic quick cut off saw with pressure
device (TP 350, TP 450, TP 500)
• Hydraulic quick cut off saw with pressure
device (Mod. TP 600)
|
|
|
| |
|
| |
| These machines are available
in a wide rage of models, with depth of cut 80, 100, 110,
120, 130 mm, motor power from 20 HP (15 kW) to 100 HP (73,5
kW). Max distance between blades from 220 mm to 450 mm. Most
machines of this series have a "sleeve" for outboard
quick fitting of the blades and they can be equipped on request
with a trimming device having two blades: one fixed and one
with visualised variable positioning. The bigger models have
hydraulic feeding.
|
|
|
|
| |
top
